SPOT Firmware Updater

SPOT Device Updater



This software is for updating the firmware or modifiable settings for the SPOT Trace.

  1. Click the Download SPOT Trace Firmware Updater button for your operating system.



    Depending on which browser you are using, you can 'Save' in order to download the installer or 'Run' to launch.
    (If saved, check your downloads folder and select "Run" to launch the install wizard.)

    For Mac : Installing Updater package requires system admin password when prompted.

    NOTE: Some Antivirus programs may prevent this application from starting. If you do encounter installation problems, please contact SPOT Customer Service.

  2. Install the SPOT Device Updater.
    • Open the downloaded file and run the install wizard, follow the prompts.
    • After installation is complete the updater will open automatically.

  3. Plug in your SPOT device.
    • For best performance, the Trace unit should be turned off.
    • Using a micro USB cable, connect your device to a computer.
    • Windows Users: If this is the first time you are plugging in your SPOT device, wait for the device drivers to install.

  4. Update your SPOT device.
    • Enter your device's Auth code and click Submit. The Auth code can be found in your device's battery compartment or Quick Start Guide.
    • Click Update Device to transfer your new settings from your account to your SPOT device.

SPOT Device Updater



This software is for updating the firmware or modifiable settings for the SPOT Gen3.

  1. Download the SPOT Device Updater by selecting the button below for your operating system.



    Depending on which browser you are using, you can 'Save' in order to download the installer or 'Run' to launch.
    (If saved, check your downloads folder and select "Run" to launch the install wizard.)

    For Mac : Installing Updater package requires system admin password when prompted.

    NOTE: Some Antivirus programs may prevent this application from starting. If you do encounter installation problems, please contact SPOT Customer Service.

  2. Install the SPOT Device Updater.
    • Open the downloaded file and run the install wizard, follow the prompts.
    • After installation is complete the updater will open automatically.

  3. Plug in your SPOT device.
    • Make sure your batteries are installed.
    • Using a micro USB cable, connect your device to a computer.
    • Windows Users: If this is the first time you are plugging in your SPOT device, wait for the device drivers to install.

  4. Update your SPOT device.
    • Enter your device's Auth code and click Submit. The Auth code can be found in your device's battery compartment.
    • Click Update Device to transfer your new settings from your account to your SPOT device.
    • Reinstall your batteries, if you removed them to secure the Auth code.


© 2019 SPOT LLC. All Rights Reserved.
Privacy Policy  |  Terms + Conditions  |  Careers  |  Site Map  |  Contact Us

All SPOT products described on this website are the products of Spot LLC, which is not affiliated in any manner with Spot Image of Toulouse,
France or Spot Image Corporation of Chantilly, Virginia.

* The SPOT rescue count does not include false alarms, duplicate alarms, test alarms, alarms that result in fatalities, or alarms received from lost or stolen units.
 

SPOT on Youtube SPOT Instagram SPOT on Twitter SPOT on Facebook SPOT Adventures